SPECIFICATIONS

5476 mm (216’’) Cab to centre of tandem standard steel body

2 x 25 ton (55,000 lbs) winches

1 set of frame fork holders and 4 sets of frame forks

Safety chains

Frame fork and chain racks

Chrome door handle

Air and 12V/24V outputs

Non slide configuration

Boom Specifications

Retracted capacity (at 70°) 50 ton (110,200 lbs)

Extended capacity (at 70°)  12.5 ton (27,550 lbs)

Maximum Lift angle  70°

Maximum Hook Height  13077 mm (515″)

Reach Past Tailboard  6947 mm (273″) Slider Option

Vehicle Recommendations

Front axle(s) weight (min)  9 ton (20,000 lbs)

Rear axle(s) weight (min)  9 ton (20,000 lbs)

+ 2 x 10.4 ton (23,000 lbs)

Recommended Tire size  R24,5

Clear CA  5476 mm (216”)

Underlift Specifications / * = Euro Option

Retracted capacity on forks  22.5 ton (50,000 lbs) / * same

Retracted distance to the forks  1844 mm (73″) / * same

Extended capacity on forks  5.6 ton (12,300 lbs) / * same

Extended distance to the forks 3700 mm (146″) / * 3811 mm (150″) 

Negative tilt angle  -8°

Tow Rating  36 ton (80,000 lbs)

Winch Specifications

Quantity  2 pcs

Pulling force (on 1st layer)  25 ton (55,000 lbs)

& optional 20 ton (44,000 lbs)

Winch type  Planetary

Cable length  22 mm x 60 m (7/8″ x 200′)

optional 19 mm x 60 m (3/4″ x 200′)

Ratings are based on structural and design factors only. Chassis capacity and performance can vary, affecting the unit’s overall rating. The listed chassis specifications are minimum requirements, and higher specifications may be needed depending on the weight of the chassis and equipment. 

The units are customisable, contact us for your requirements.