150KW Generator Power with Diesel (Perkins) Engine

 

CAEL generators provide complete power generation solutions, ensuring optimal performance, dependability, and versatility for standby and primary power requirements.
Driven by a CAEL Certified Diesel Engine, Stamford CSA Approved Alternator, and SmartGen Control Panel.

Manufacturer CAEL

Model: 150Kw

Prime Power: 150 kW

Frequency / Speed: 60 Hz / 1800 rpm

Exciter Type: Single bearing, brushless, self-excited

Power Factor: 0.8

Voltage Adjust Range: ±5%

AVR Insulation: Grade H

Number of Poles: 4

Protection Grade: IP23

Phase / Wire: 3 phase, 4 wire

Control Panel

Controller Model: Deepsea 6120

Digital Readouts:

Generator voltage

Output frequency

Engine speed

Battery voltage

Engine hours run

Failure Indicators:

Overspeed / low speed

Emergency stop

Low oil pressure

High water temperature

Failure to start

Battery charger failure

Automatic Shutdown Protection:

Low engine oil pressure

High engine water temperature

Overspeed / low speed

Failure to start after three attempts

Engine Specifications

Model: Perkins 11060-E7OTAG3

Number of Cylinders: 6 cylinders

Cycle: 4-stroke

Compression Ratio: 16.8:1

Aspiration: Turbocharged & after-cooled

Combustion System: Direct injection

Bore × Stroke: 105 mm × 135 mm

Displacement: 7.01 L

Prime Power / Speed: 159 kW @ 1800 rpm

Standby Power / Speed: 178 kW @ 1800 rpm

Speed Governor: Electronic

Cooling System: Water-cooled

Lube Oil System

Total Lubrication Capacity: 16.5 L

Recommended Oil Type: CD 15W-40 (CH-4 or above)

Coolant System

Engine Coolant Capacity: 21 L

Maximum Water Temperature: 102°C

Thermostat Range: 82–94°C

Fuel System

Fuel Type: AM Diesel

Fuel Consumption at 100% Load: 212 g/kW·h

 

General Specifications

Engine Model: Perkins 1106D-E70TAG3

Emission Standard: TIER 3

Alternator Model: Stamford UC1274F

Digital Controller

Model: DSE 6120

Electrical Components

Start Battery: Varta

Battery Charger: SmartGen

MCCB Brand: CHINT

Relay Brand: Siemens APT

Micro Breaker: LS

Standard Equipment

50°C heavy-duty radiator

24V DC starter motor

Vibration isolators between engine/alternator and base frame

High-performance maintenance-free lead-acid starting batteries with battery switch

Industrial silencer with flexible exhaust hose

High-performance MCCB circuit breaker

Designed to comply with ISO 9001 and CE standards

Each generator undergoes full load testing at 50%, 75%, 100%, and 110% load including all control and safety shutdown functions

Dimensions & Weight

Open Type Generator Set

Dimensions: 2700 mm × 900 mm × 1600 mm

Weight: 1900 kg

Silent Type Generator Set

Dimensions: 3300 mm × 1400 mm × 1750 mm

Weight: 2230 kg

Fuel System

Base Fuel Tank Capacity: 280 litres

Approximate Running Time: 8 hours

Electrical Specifications

Voltage: 600V

Frequency: 60 Hz

Phase: 3 Phase

Power Factor: 0.8

Current: 360A

Standby Power: 150 kW

Prime Power: 135 kW

Power Ratings Description

Prime Power
This rating is for continuous electrical power supply at variable load.
There is no limit on annual operating hours.
A 10% overload capacity is available for 1 hour in every 12 hours of operation.

Standby Power
This rating is for continuous electrical power supply at variable load during a utility power failure.
Overload capability is not permitted under this rating.

Warranty:

Parts covered for 1 year or 1000 hours with guidance provided.